پوشش آب بندی ویژه سرویس های بهداشتی ISONEM DF 9

پوشش آب بند ویژه آب بندی سرویس های بهداشتی با قابلیت عدم نیاز به کاشی کاری


ISONEM DF 9 is a single component acrylic polymer-based and elastomeric resin-based waterproofing material. It does not contain solvent. By
drying on the applied surface, it forms a jointless and waterproof elastic coating. The coating is resistant to mechanical strength. ISONEM DF 9
with high crack bridging capacity, can be adhered onto any surface with the appropriate adhesive. But we recommend you to use ISONEM M 20
acrylic adhesive on the acrylic insulation material. It is adhered perfectly to many surfaces such as metal, plastic, wood, concrete, screed etc. Thus,
it insulates floors, water outlets, pipes extremely safe.
USAGE AREAS:
•In wet rooms
•In bathrooms, Wcs
•In terraces and balconies
•In kitchen and similar place etc
•is suitable for use indoors and outdoors.
USAGE TYPE:
The application surfaces must be dry or slightly moist and clean. The surface repairs and preparation prior to the insulation must be completed on
the application surfaces. In junctions of walls and bases, 75 gr of net reinforces must be used. ISONEM DF 9 is ready to use but must be well mixed
before use. If there are materials preventing the adhesion such as dust, dirt etc, ISONEM D10, adhesion promoter must be applied on the subfloor.
APPLICATION TYPE:
ISONEM DF 9 is applied with a brush or a roller on the surface as a primer diluted with water at a ratio of 1:1. The primer is left to dry for 4 hours.
Later, ISONEM DF 9 is applied in two layers for 4 hours of intervals without dilution.
CONSUMPTION: 1 kg/m²
PACKING TYPE: 18 kg plastic pails
STORAGE: Shelf life 12 months
CLEANING OF TOOLS: After application, with water

نظرسنجی


دریافت کاتالوگ ها و فرم ها